Daemon4x4 - 4x4 & Off Road Technical Board

Daemon4x4 - 4x4 & Off Road Technical Board

  • [ You are not logged in ]
  • Members online: 0
Icon - Increase font size Icon - Decrease font size Icon - Reset font size

All fields which are not marked as optional are required. They must be completed before the form can be submitted.

[ Those fields requiring attention are highlighted. ]

#101-12-2009 16:39:03

Thats I'm grounded again

Going in for op on my right hand/wrist tomorrow morning, so have decided to Sorn the surf for the time being as I'm not going to be able to use it for at least 2 months sad

By the time I'm able to start doing stuff again I'll have a list of jobs to complete starting with replacement of rear wheel bearing/shafts (cheers Bio), just in time for it's MOT

#201-12-2009 16:57:52

Re: Thats I'm grounded again

Good luck with the op Andy

#301-12-2009 16:58:50

Re: Thats I'm grounded again

Cheers Ian

#401-12-2009 17:23:24

Re: Thats I'm grounded again

smile all the best mate hope all goes well

#501-12-2009 19:46:19

Re: Thats I'm grounded again

Good luck Andy.....

#601-12-2009 20:03:02

Re: Thats I'm grounded again

good luck Andy

#701-12-2009 20:05:48

Re: Thats I'm grounded again

best of luck andy hope it sorts your problems.... and hope you get surf fixed....

BTW as a mini hi-jack  whistle

are rear wheel bearings a big job with out oxy-acetyline.....

#801-12-2009 20:24:08

Re: Thats I'm grounded again

whistle Cheers fella's, I'm on the look out for a left handed mouse at moment big_smile

BigBobE, I believe they can be done with an angle grinder and big hammer and chisel smile although your best bet would be to find a local garage with a large press.

I'm fortunate enough to have acquired some 2nd hand one's,  prefitted to the shafts with back plates and brakes fittted, aren't I Ian  whistle

#901-12-2009 20:29:06

Re: Thats I'm grounded again

Icon - Post link BigBobE wrote:

best of luck andy hope it sorts your problems.... and hope you get surf fixed....

BTW as a mini hi-jack  whistle

are rear wheel bearings a big job with out oxy-acetyline.....
you need a hydrolic press .......and it is possible to bend the back plate , when we did it we bored out one of the old collets to assist pressing it all back together

#1001-12-2009 20:56:28

Re: Thats I'm grounded again

i have access to a hydraulic press alright, just costs me whiskey tongue

#1101-12-2009 23:20:42

Re: Thats I'm grounded again

Best wishes Andy.

#1201-12-2009 23:37:24

Re: Thats I'm grounded again

Good luck Andy. Give me a shout if you need transport or anything

Ian

#1302-12-2009 01:32:09

Re: Thats I'm grounded again

Best of luck mate!!
Display⁄Hide tags
Tag on Bebo Tag on BlinkList Tag on Connotea Tag on Del.icio.us Tag on Digg Tag on Diigo Tag on Facebook Tag on Google Tag on Linkedin Tag on Mister Wong Tag on MSN Live Tag on Myspace Tag on Newsvine Tag on Reddit Tag on Spurl Tag on StumbleUpon Tag on Technorati Tag on Twitter Tag on Yahoo