Daemon4x4 - 4x4 & Off Road Technical Board
Daemon4x4 - 4x4 & Off Road Technical Board
- [ You are not logged in ]
- Members online: 1
All fields which are not marked as optional are required. They must be completed before the form can be submitted.
[ Those fields requiring attention are highlighted. ]
#108-02-2010 19:40:30
- Bushwhacker
- MODERATOR.
- Mood: Laid back as usual.
- Registered: 06-05-2007
- Posts: 1167
@ vatch.
Mark, do/will you make propshaft spacers?
Are/would they be cheaper than LAS @ £70 a pop?
Ta.
Are/would they be cheaper than LAS @ £70 a pop?
Ta.
————————————————
#208-02-2010 19:49:41
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
how thick do you want them? ally billet? and i take it they are to fit the surf.?let me do some sums for you.oh how many would you want.Mark, do/will you make propshaft spacers?
Bushwhacker wrote:
Are/would they be cheaper than LAS @ £70 a pop?
Ta.
#308-02-2010 19:51:03
- Bio Hazard
- YETI BOT
- Mood: Down
- Registered: 17-03-2007
- Posts: 4257
Re: @ vatch.
The one i have lost in my garrage was ally
#408-02-2010 19:53:15
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
lost??????? is it not on your rear prop then????The one i have lost in my garrage was ally
#508-02-2010 19:55:15
- Bio Hazard
- YETI BOT
-
- Mood: Down
- Registered: 17-03-2007
- Posts: 4257
Re: @ vatch.
no my rear prop is half 1st gen and half ickup
lost??????? is it not on your rear prop then????The one i have lost in my garrage was ally
#608-02-2010 19:55:37
- Matt
- Nerdy & Proud
- Registered: 16-03-2007
- Posts: 4352
Re: @ vatch.
Why do I get the feeling this thread is going downhill so fast after that nugget? 
#708-02-2010 19:57:28
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
no................ your front prop shaft is half 1st gen half pickup.
no my rear prop is half 1st gen and half ickup
lost??????? is it not on your rear prop then????The one i have lost in my garrage was ally
#808-02-2010 19:57:59
- Bushwhacker
- MODERATOR.
-
- Mood: Laid back as usual.
- Registered: 06-05-2007
- Posts: 1167
Re: @ vatch.
Yeah, they're for the Surf's prop.
how thick do you want them? ally billet? and i take it they are to fit the surf.?let me do some sums for you.oh how many would you want.Mark, do/will you make propshaft spacers?
Are/would they be cheaper than LAS @ £70 a pop?
Ta.
1 1/2" would be ideal in ally.
I can source my own bolts/nuts.
When I fit the Lexus V8s I mount them as high as possible so that the sump clears the front diff, which obviously raises the transmissions too. If the truck has a suspension lift as well, (L/C springs for example) the sliding yoke on the prop is on the limit of it's travel. OK for on the road and very mild off roading, but get into any axle twisting situations and the joint may seperate.
————————————————
#908-02-2010 19:58:58
- Bio Hazard
- YETI BOT
-
- Mood: Down
- Registered: 17-03-2007
- Posts: 4257
Re: @ vatch.
ok but there is no spacer as it's in the garrage .....................somewhere 
#1008-02-2010 20:01:43
- gwh200
- Baaanned
-
- Mood: Eeeereeeeeeeerr
- Registered: 20-07-2007
- Posts: 2052
Re: @ vatch.
Oohhh.... I might need one of those then vince. This one may occasionally go "off the road".
#1108-02-2010 20:02:03
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
im sure i can do something vince,would you want them in batch form i can do a better deal on ten than i can on one if you know what i mean.
Yeah, they're for the Surf's prop.
how thick do you want them? ally billet? and i take it they are to fit the surf.?let me do some sums for you.oh how many would you want.Mark, do/will you make propshaft spacers?
Are/would they be cheaper than LAS @ £70 a pop?
Ta.
1 1/2" would be ideal in ally.
I can source my own bolts/nuts.
When I fit the Lexus V8s I mount them as high as possible so that the sump clears the front diff, which obviously raises the transmissions too. If the truck has a suspension lift as well, (L/C springs for example) the sliding yoke on the prop is on the limit of it's travel. OK for on the road and very mild off roading, but get into any axle twisting situations and the joint may seperate.
#1208-02-2010 20:03:14
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
best we go and have a good route around your garage the wkend then matey.ok but there is no spacer as it's in the garrage .....................somewhere
#1308-02-2010 20:07:18
- Bushwhacker
- MODERATOR.
-
- Mood: Laid back as usual.
- Registered: 06-05-2007
- Posts: 1167
Re: @ vatch.
At the moment I only need four, but all Surfs with big suspension lifts (more that 3" anyway) should fit them to be honest.
im sure i can do something vince,would you want them in batch form i can do a better deal on ten than i can on one if you know what i mean.
Yeah, they're for the Surf's prop.how thick do you want them? ally billet? and i take it they are to fit the surf.?let me do some sums for you.oh how many would you want.
1 1/2" would be ideal in ally.
I can source my own bolts/nuts.
When I fit the Lexus V8s I mount them as high as possible so that the sump clears the front diff, which obviously raises the transmissions too. If the truck has a suspension lift as well, (L/C springs for example) the sliding yoke on the prop is on the limit of it's travel. OK for on the road and very mild off roading, but get into any axle twisting situations and the joint may seperate.
————————————————
#1408-02-2010 20:13:18
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
well i know i can get the ally billets for about £20 each,then theres the time on the lathe and plotting and drilling the holes,i may be able to do them for about £50 each.if thats any good to you vince.
At the moment I only need four, but all Surfs with big suspension lifts (more that 3" anyway) should fit them to be honest.
im sure i can do something vince,would you want them in batch form i can do a better deal on ten than i can on one if you know what i mean.
Yeah, they're for the Surf's prop.
1 1/2" would be ideal in ally.
I can source my own bolts/nuts.
When I fit the Lexus V8s I mount them as high as possible so that the sump clears the front diff, which obviously raises the transmissions too. If the truck has a suspension lift as well, (L/C springs for example) the sliding yoke on the prop is on the limit of it's travel. OK for on the road and very mild off roading, but get into any axle twisting situations and the joint may seperate.
#1508-02-2010 20:24:37
- stormforce
- Pickled Egg Eater
-
- Registered: 06-05-2007
- Posts: 1397
Re: @ vatch.
wasn't that the one you couldn't find for me Ian
best we go and have a good route around your garage the wkend then matey.ok but there is no spacer as it's in the garrage .....................somewhere
#1608-02-2010 20:26:59
- Bio Hazard
- YETI BOT
-
- Mood: Down
- Registered: 17-03-2007
- Posts: 4257
Re: @ vatch.
Thats right ...... i still cannot find it .......but you have seen the state of my garage...............
wasn't that the one you couldn't find for me Ian
best we go and have a good route around your garage the wkend then matey.ok but there is no spacer as it's in the garrage .....................somewhere
It's got all sorts of things in there , like brake hoses
#1708-02-2010 20:37:55
- stormforce
- Pickled Egg Eater
-
- Registered: 06-05-2007
- Posts: 1397
Re: @ vatch.
yyes bugga i must admit i did forget but i will bring it home tomorrow ready to post for you.PM me your addy so i can post it off
Sorry my head ain't been with it lately
Sorry my head ain't been with it lately
#1808-02-2010 20:40:08
- Bio Hazard
- YETI BOT
-
- Mood: Down
- Registered: 17-03-2007
- Posts: 4257
Re: @ vatch.
No rush ....... i'll have another look for the spacer , as i think mark wants the measurements
#1908-02-2010 20:50:09
- TonyN
- The Evil Dr Blot
-
- Mood: Mischievious
- Registered: 15-05-2007
- Posts: 672
Re: @ vatch.
ooh, this thread reminds me, I need some LC coil adapters ASAP.
MARK!!!!!
MARK!!!!!
#2008-02-2010 20:51:24
- Matt
- Nerdy & Proud
-
- Registered: 16-03-2007
- Posts: 4352
Re: @ vatch.
I thought he was suggesting that you ought to get it on your rear prop as soon as?No rush ....... i'll have another look for the spacer , as i think mark wants the measurements
#2108-02-2010 20:54:50
#2208-02-2010 22:09:55
- surfenstein
- Crashed Randycoot
-
- Mood: sarcastic
- Registered: 05-05-2007
- Posts: 1258
Re: @ vatch.
one set left tony.all your if you want them.ill give you a ring in the morning.ooh, this thread reminds me, I need some LC coil adapters ASAP.
MARK!!!!!
#2308-02-2010 22:14:40
- TonyN
- The Evil Dr Blot
-
- Mood: Mischievious
- Registered: 15-05-2007
- Posts: 672
Re: @ vatch.
cool, i'll have 'em, they need to be off to Morroco in a few weeks...
one set left tony.all your if you want them.ill give you a ring in the morning.ooh, this thread reminds me, I need some LC coil adapters ASAP.
MARK!!!!!
